Home

When you’re looking for a new Western saddle, there are a lot of things to consider. You’ll want one that fits your horse well and is comfortable for both rider and pacer. But you also need to make sure it doesn’t have any “overlapping bars” on the gullet—that’s where the back meets the spine; these bars can irritate or even hurt horses’ backs if they rub against them while they’re being ridden or driven. Horse Saddle Shop is the source for western saddles and english saddles. We offer a large variety of western saddles, english saddles, and other products. Our products are excellent quality and most importantly, affordable. Check us out today!

Make sure your saddle fits the horse.

The first thing you need to do is make sure the saddle fits the horse. This means that it should be wide enough to support his back, long enough to support his spine and withers and deep enough so that he can move freely in it.

The horse saddle should also be made from a material that doesn’t irritate the horse’s skin and make him uncomfortable. Leather is usually the best option, especially if you have a horse prone to sweating—it won’t stick to his back and rub him raw.

The saddle should have a thick pad on the underside, which will cushion the horse’s back and keep him comfortable. You should also make sure that there are no rough edges or sharp pieces of metal sticking out anywhere, as this can cause injury.

Saddle fit is about much more than size.

Saddle fit is about much more than size. It’s about the whole package, and it’s important that you understand all of the elements of a good saddle fit before making your choice.

The horse’s back and spine should be able to move freely beneath the saddle. If your horse has back problems, then this may not be an option for you unless you’re willing to try another type of Western saddle.

The saddle should be comfortable for both rider and horse; there should be no pressure points on either side of their bodies while they’re riding or working in it or afterwords if they happen to fall off unexpectedly (which happens often). You’ll also want something that doesn’t cause any irritation from sweat or other bodily fluids going onto sensitive areas like underarms or crotches—this can lead quickly into chafing issues where redness starts flaring up due to too much friction between two surfaces rubbing against each other too much unevenly over time!

You’ll want something that’s durable and long-lasting, but not so heavy that it weighs down your horse too much. You’ll also want something that has the right amount of flexibility for their specific type of work—if they’re going to be doing lots of jumping, then you’ll probably want something with more give to it than if they’re just trotting around a show ring or arena.

You’ll need to have an accurate measurement of your horse’s back.

You’ll need to have an accurate measurement of your horse’s back. This is important because the saddle is going to be fitted across this area. If you don’t know how big or small it needs to be, then it won’t fit right and you’ll end up with soreness or discomfort in the future.

Measure your withers (the highest point on a horse’s back) by placing two fingers under each side of its neck at its widest part and measuring from there down until they reach their lowest point (the croup), where they meet overtop of their spine toward each other like two eyebrows meeting above an eye socket when looking straight ahead.

Measure their barrel by putting one hand around their neck while holding onto another hand with both hands behind them so that both arms are extended outwards horizontally along either side of their body simultaneously—this will help keep everything stable while doing this measurement! Then take note about how far apart these two points are located within an imaginary circle above each shoulder blade; if they’re too close together then consider getting another saddle made up especially for him/her until such time as he/she grows into adulthood whereupon we can then swap out saddles depending upon his unique shape without having too much trouble finding something else suitable instead–but remember: always consult beforehand before changing anything significant about either ourselves nor others!

Avoid saddles with “overlapping bars.”

When a saddle has “overlapping bars,” the shape of the seat can be uneven. This happens when there are gaps between two or more of the rails, so that your leg falls into one area and another part goes over you. It’s not just uncomfortable; it also causes chafing if you’re riding in loose-fitting clothes (like jeans) or sitting down for long periods of time like at work or church.

Another reason not to buy an overlapping bar saddle is because they tend to be heavier than other saddles—and this could affect your ability to balance while riding!

There are many other reasons why you should avoid an overlapping bar saddle, including the fact that they’re prone to breaking and can cause bodily injury in the event of a fall.

The gullet should be just wide enough to allow the back and spine to move freely beneath the saddle.

When choosing a saddle, you should pay attention to the gullet. It’s usually made of leather and has a hole for your horse’s back legs, but also has an opening in front where the rider sits. The width of this opening is called “gullet.”

The gullet should be wide enough to allow the back and spine to move freely beneath your saddle. It should be wide enough for your leg as well as hip area—the girth strap will prevent chafing! Make sure it’s not too narrow either; if it gets pinched between two bones or joints while riding then there will likely be pain later on when sitting down after riding (which could lead directly into soreness).

The gullet should also be long enough so that your horse’s back can move freely beneath it. If it is too short, then the saddle will create pressure points on either side of the spine or around the withers area (where some saddles have a cutout). This could lead to soreness or injury down the road!

The saddle should fit the rider, too.

A saddle that fits the horse is not necessarily a good fit for the rider. The rider should be able to sit comfortably in the saddle, with their legs easily reaching the stirrups.

If you’re still unsure about what size Western saddle is right for you, we have some tips on how to measure yourself so that you can find one that works best with your body type and riding style:

-Measure your inseam: Your inseam is the length from the floor to your crotch. This measurement will help you determine how long a saddle should be, so make sure that you stand with both feet flat on the ground when measuring. -Measure around your hipbone: Stand sideways against a wall and place a tape measure around your natural waistline level with the belly button. This will tell you what size English saddle is right for you.

A quality, well-fitting Western saddle shouldn’t need a lot of padding to be comfortable.

When it comes to picking the best fitting western saddle, it’s important to remember that a quality, well-fitting Western saddle shouldn’t need a lot of padding to be comfortable. The rider and horse should both like how their equipment feels on them.

It’s also important not to overdo it when it comes to padding; some people think that more padded saddles are better than others because they feel more stable and secure when riding in them, but this isn’t true! While some people may prefer a soft pad over an uncomfortable one (or vice versa), generally speaking there’s no reason why you need more than just enough cushioning so that your horse doesn’t feel like he’s sitting on rocks instead of being held securely by his backbones—and there aren’t many horses who would complain about such treatment!

The best way to find out what kind of padding your horse likes is simply to try different types of saddles, pads and girths over time. It’s also important to remember that there are many different ways in which a saddle can be fitted; some people prefer a more forward position with their legs slightly bent so that they can use their knees as shock absorbers during hard riding while others might choose to ride with their legs held straight out from their body (for example).

There is a lot to consider when you’re looking at new saddles, but it’s possible to find one that will suit you and your horse perfectly.

When you’re looking for a new Western saddle, there are several things to consider. There’s the obvious size of the saddle, but fit is also about how comfortable it will be on your horse.

A quality, well-fitting Western saddles shouldn’t need a lot of padding to be comfortable. You want one that fits like an old friend and makes both of you feel good in your seat without any extra bulk or pressure around your hips or shoulders.

The first step to finding a good fit is measuring your horse. It’s best to have someone help you take the measurements, but if you’re on your own, use this guide to get started.

Conclusion

We hope that these tips will help you find a saddle that fits you and your horse. There’s no need to feel rushed when making this decision, and remember that it’s okay if it takes some time. In the end, what matters most is finding something that works well for both of you!